Category Archives for "Radar Detector Accessories"

BlendMount BMX-2000R Radar Detector Mount

Aluminum Radar Detector Mount

Have you ever had speeding tickets? Did you know that there is a way to bypass being detected? And no, we did not mean the Grand-Theft-Auto way!

An electronic device called “Radar Detector” is your friend when it comes to meticulous roads with high levels of sophisticated detection. You can use this to detect if your speed is being monitored under a radar gun. Thus, giving you the chance to reduce speed before getting ticketed for speeding. But it is not just having the device per se. The key to getting a clear signal is the correct positioning of your radar detector.

Now, there are a variety of ways to position this device. Most often, these come with mounting brackets which allow you to position them on your windshield, your dashboard, or even your visor. Depending on the model of your radar detector, there will be an advantageous location for it. Moreover, determining its features will also give you the best idea on where to position it.

Optimizing Your Radar Detector

Here are some features of radar detectors that will give you a hint where you should put them.

  • Laser Detector – Low Mount

A laser detector is always aimed at the front of your car. It is pointed at the grill or license plate of your car to check how fast you are going and having a radar detector mounted low anywhere on the windshield will be the most effective way to intercept the signal.

However, if your locality has more laser detectors than radar ones, a laser signal jammer is essential to avoid getting a ticket. A laser detector will only be effective in determining if you are being checked and inform you about it. You will still get a ticket if you do not have a jammer equipped in front of your car.

  • Radar Detector High Mount

Your main concern, the radar detector, is no doubt best placed high on your windshield. A higher location of your device will mean better signal reception. As such, visor-mounted and rearview-mounted detectors have the most advantage.

The Safety of the Device

Radar and laser detectors quite cost a serious amount of money. And just like any other expensive devices, you will naturally want to protect it from getting broken—or worse, getting stolen.

Some radar detectors come with fixed mounts, and others are detachable units. The latter gives you the best advantage in keeping them out of sight when not in use. Some prominent models have aftermarket mounting brackets that will fit the existing groves and provide a more versatile way to position your radar detector while giving you the option to detach it when necessary.

BlendMount BMX-2000R Aluminum Radar Detector Mount Review

Blendmount is in the business of crafting mounts for action and dash cameras, radar detectors, and other devices that need to be on your console. They were founded in 2005 and had provided many of their clients with excellent-quality mounting devices that make sure that their media devices are safe and have more option than the default feature it comes with.

They make different mounts that fit different devices for varying brands. This California-based company is competitive and aims to be on top of their game by providing excellent customer satisfaction. They take pride in their customer care and aftermarket service that support clients with concerns regarding their products.

Product Features

The BlendMount BMX-2000R Aluminum Radar Detector Mount is a universal mounting bracket that fits most cars. This product is designed to accommodate Escort Max, Escort max II, Escort Max 360, and Escort GT-7. It is made of sturdy and lightweight aircraft-grade anodized aluminum. It has three points of adjustments to make sure that it is angled just how you want it.

It also has pivot adjustments that can be fixed by an Allen wrench which is included in the kit. It can also be vertically adjusted to how low you want it to sit in front of you, just make sure that it would not fall off through the bumpiest ride.

Furthermore, it is mounted to the rearview mirror stem and does not need suction cups. The attachment point is fitted with a nylon bushing to fit your rearview mirror stem perfectly. The center link is detachable if and can be removed if you want your radar detector sitting high.

Pros

  • This product is versatile and has multiple points of adjustments for customized installation.
  • The BlendMount BMX-2000R Aluminum Radar Detector Mount is made of sturdy and lightweight anodized aluminum.
  • The package includes an Allen wrench for easy adjustments.
  • It can be fixed by tightening the Allen screws.

Con

  • This product is quite pricey.

Summary

Blendmount is a company known for durability and flexibility. It is also trusted by many car device manufacturers.

With regards to its product, the BlendMount BMX-2000R Aluminum Radar Detector Mount; it is a durable mounting bracket that is made with top-notch material such as the sturdy and lightweight anodized aluminum. It is versatile to adjust in many points to give you the perfect view. Additionally, its pivot points can be fixed by an Allen screw, which is already included in the package so that it will stay in place.

Comparison

Escort, the manufacturer of the radar detector, offers various models of mounting brackets for their devices. Among those is the Escort Max 360 Stickycup Windshield Mount which is more compact and lightweight compared to the BlendMount BMX-2000R Aluminum Radar Detector Mount. However, although this suction mount is a lot cheaper than the latter, it is not as stable as rearview mounting brackets. Not to mention, the BMX-2000R offers more versatility regarding device adjustments.

Verdict

There are a whole lot of mounting devices you can use for Escort radar detectors. However, BlendMount BMX-2000R Aluminum Radar Detector Mount seems to be one of the best bracket-type mounts you can use. Compared with suction cups and visor mounts, this model is the most stable of them all that would not budge even with the worst bumps in the road.

Best Mount for Radar Detectors Based on Performance

Best Mount for Radar Detectors Based on Performance

Driving our vehicles at a fast speed is something that we do at times for the fun of it, and then there are times when you just have no choice. Meaning, sometimes, it is inevitable and when you get caught doing it, is just bad luck.

Thankfully, ever since the invention of radar detectors, people are more cautious now about getting caught. When you shop for one, you will find several radar detectors, but none come with a mount. Nonetheless, you can also purchase the best mount for radar detectors today.

Radar Detectors: The Best Places to Mount Them

Generally speaking, it is important to know where to place the radar detector to get the best results. You can mount it on three places in your car. Either on the top, under the rear-view mirror or at the bottom near the dashboard. Each of these areas has their own set of pros and cons. Let’s discuss them briefly.

  • High Mount 

Mounting your radar detector at a high level will give it the best performance and your vehicle the cleanest look since there is no visible wire on the windshield. However, this should only be done by a professional technician. Also, if you have no hard wire, the wire will run down your windshield.

  • Rear-View Mirror Mount 

This type of mounting is a great alternative if suction cups are illegal where you live. Since there are no suction cups, there is no stress of it ever falling, and the installation is very professional looking. Unfortunately, there is an extra cost for a specific rear-view mirror mount and the radar detector, in some cases, could block your visibility while you drive.

  • Low Mount 

The most considerable advantage of mounting the detector at a low level is that it does not block your visibility while you drive and the wire can run down your dashboard straight to the power outlet. In addition, the installation process is also a breeze. The problem is that it has very less range to detect any radar and the wiper may pose an obstruction to detect the radar frequency.

Best Mount for Radar Detectors: Our Top Picks

Now that you have an idea where you could mount your radar detector, let us review three mounts for radar detectors.

BlendMount Radar Detector Mount 

Most radar detector mounts typically stick with the help of suction cups, and in some places use of suction cups on the car is considered illegal. As mentioned earlier, this is where having a rear-view mirror mount comes in great use. The BlendMount Radar Detector Mount is one of the products in the market that offers such.

Features:

The best part about the BlendMount Radar Detector Mount is that it is designed for specific radar detector models and by specific, we mean the top-rated radar detectors on the market. Some of which include Beltronics, Escort, Escort iX, Escort Max Series, Valentine One, and Cobra. In addition to being a mount for radar detectors, this mount will also work with a GoPro. So, if you like vlogging, then this mount would make perfect sense for you.

Apart from the absence of suction cups, this mount will never bounce no matter how many bumps exist on the street. Along with that, there will be noise and vibration coming out of it either. You also do not need to worry about this mount’s quality, as it made from premium black anodized aluminum, which is made in the United States of America and has a patented design. The mount also has great adjustability, so it works at all times and in no way becomes an obstruction to your visibility.

With regards to the radar detector mount’s size and weight, it weighs only 4.8 ounces, and its dimensions are 5.8 inches x 4.4 inches x 1.5 inches.

Pros:

  • Made out of quality material
  • Works well with several top-rated radar detector mounts and GoPro
  • Safe to use

Con:

  • May have issues with the Corvette radar detector.

ChargerCity Super Suction Radar Detection Mount 

Assuming that you live in places where suction cups aren’t illegal, the ChargerCity Super Suction Radar Detection Mount is one of the best mounts on the market of this type.

Features:

The base of this mount has a strong and sticky polyurethane gel. This is one of the strongest you will find when it comes to suction cups and has a steadfast adherence to the windshield. Also, the company has installed a new and improved metal slide in the cradle. That does not only has a perfect fit but will also ensure that the mount never vibrates or even shake while you drive or when you go over a speed breaker.

Installation of this product is quite easy as it comes with an adjustable thumb screw knob in order to lock the radar detector into its right position. Additionally, it works well in any extreme weather. As a bonus, the company offers a direct manufacturer replacement warranty in case of any damage. Further, its packaging has zero mess or fuss.

Pros:

  • Easy to install
  • Strong and sticky suction cup
  • Comes with a direct manufacturer replacement warranty

Con:

  • The mount is only compatible with Escort Passport Max Series.

Arkon Radar Detector Mount

There a ton of options when it comes to suction-type radar detector mounts. However, only a handful of them are of an excellent quality, and Arkon Radar Detector Mount is one brand that is promised to have high quality.

Features:

This radar detector mount weighs only about 5.6 ounces, and its dimension is five inches all throughout. It is compatible with several radar detectors like Escort, Rocky Mountain Phantom-T, and Beltronics. This is a feature that not many suction-type radar detector mounts possess.

Installing the Arkon Radar Detector Mount is very easy as it comes with an adjustment knob but what takes the cake is its powerful suction cup. That is because it features just a single suction cup that holds on to the windshield for a long time, no matter if the weather is extremely hot or cold. Likewise, the company does offer its customers with a limited two-year warranty too.

Pros:

  • Comes with a two-year limited warranty
  • Capable of holding several different brands of radar detectors
  • Strong suction cup that works in any kind of weather
  • Easy to install

Con:

  • The radar constantly needs to be adjusted to remain straight else it will always remain at an angle

Final Conclusion 

There are a lot of best mount for radar detectors that are available on the market and we have chosen the three because they are all easy to install. Nonetheless, each of them is brilliant in their own categories and will serve its purpose very well. Hence, choosing one amongst them is quite difficult.

If you prefer suction-types and if its legal in your area, the Arkon Radar Detector Mount is your best choice when it comes to versatility but the one from ChargerCity has a better suction power. However, we still lean towards the BlendMount Radar Detector Mount as is it made from a high-quality material and can support several different kinds of radar detectors as well as a GoPro gadget. What adds up to our recommendation is the fact that there is never a chance of it ever falling down as it doesn’t function on any suction.